Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced T2300HG6 LS sw23346 - PA6T/66-GF30 - BASF

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 물질의 비성질 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Heat stabilized, partially aromatic polyphthalamide for injection molding with strong mechanical properties especially at elevated temperatures and good chemical resistance for highly stressed parts. The product can be characterized as compound with high strength and stiffness. It features a high melting point (310°C) and good heat resistance.

Markets & applications
Automotive: sensors, e-mobility
E&E: Connectors
Consumer goods

Processing/Physical Characteristics	건조/응축	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	5 / *	cm³/10min	ISO 1133
온도	320 / *	°C	-
하중	5 / *	kg	-
성형 수축률, 평행	0.5 / *	%	ISO 294-4, 2577
성형 수축률, 수직	1.1 / *	%	ISO 294-4, 2577

기계적 특성	건조/응축	단위	시험규격
ISO 데이터
인장탄성률	10400 / 10200	MPa	ISO 527
파단시 강도	190 / 160	MPa	ISO 527
파단시 신율	2.8 / 3	%	ISO 527
굴곡 계수, 23°C	9300 / 9300	MPa	ISO 178
굴곡 강도	270 / 240	MPa	ISO 178
챠피 충격 강도 , +23°C	90 / 75	kJ/m²	ISO 179/1eU
챠피 충격 강도, -30°C	65 / 55	kJ/m²	ISO 179/1eU
챠피 노치드 충격 강도, +23°C	8.5 / 8.1	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	7.5 / 7.1	kJ/m²	ISO 179/1eA

열적 특성	건조/응축	단위	시험규격
ISO 데이터
녹는점, 10°C/min	310 / *	°C	ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa	280 / *	°C	ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa	280 / *	°C	ISO 75-1/-2
선형 열팽창 계수, 평행	22 / *	E-6/K	ISO 11359-1/-2
선형 열팽창 계수, 수직	72 / *	E-6/K	ISO 11359-1/-2
두께 H인 제품의 난연성	HB / *	class	IEC 60695-11-10
테스트 두께	0.4 / *	mm	-

전기적 특성	건조/응축	단위	시험규격
ISO 데이터
상대 유전뮬, 1MHz	3.8 / 4	-	IEC 62631-2-1
소산 인자, 1MHz	170 / 270	E-4	IEC 62631-2-1
부피 저항	>1E13 / >1E13	Ohm*m	IEC 62631-3-1
표면 저항	* / >1E15	Ohm	IEC 62631-3-2
CTI	- / 600	-	IEC 60112

기타 특성	건조/응축	단위	시험규격
물에서의 흡수성	4.2 / *	%	ISO 62와 유사
조건에서의 흡습성	1.32 / *	%	ISO 62와 유사
밀도	1390 / -	kg/m³	ISO 1183
Bulk density	700	kg/m³	-

물질의 비성질	건조/응축	단위	시험규격
ISO 데이터
점도수	130 / *	cm³/g	ISO 307, 1157, 1628

도표

특징

생산 공정

사출 성형, 기타 압출

인도 유형

펠렛 (입자,알갱이), 검정

부가물

윤활제

특별 특성

열안정성

내화학성에

General Chemical Resistance

응용

자동차의, 전기 및 전자

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 320 - 340 °C
injection molding, Melt temperature, recommended: 330 °C
injection molding, Mold temperature, range: 120 - 160 °C
injection molding, Mold temperature, recommended: 140 °C
injection molding, Dwell time, thermoplastics: 5 min

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.